The Rig Vacuum system is powerful enough to suck just about anything off the ground, including mud, dirt, and liquids of every variety. Rig Vacuum system is designed to collect all drilled solids that are produced while your rig is drilling, effectively eliminating waste before it becomes a problem.

Rig mud recycling system can help to reduce drilling waste and separate drilling cuttings with fluids, it will help a lot for the vacuum unit.

Mud gun

BY 22 September 2012 Uncategorized

NOV Mission mud gun is one of the popular mud gun, with 2 inch and 3 inch for choice. GN mud gun is function equivalent just dimension is different, we also have 2” and 3” for choice, with model NJQ50-3 & NJQ80-3. Their common features including a collapsible handle, a 360˚ rotating swivel body, and the ability to be customized to any length, flanged or threaded.

Mud gun is widely used in mud tank system with mud agitator, their function is to agitate the mud to less precipitation, so there is less sand left on the bottom of the tank, it is easy for cleaning and better for drilling performance.

The picture right showed a mini mud cleaner used for Geothermal well drilling. There are 2 mud tanks in the mud system, one is treatment tank, 1 is storage tank. On the 1st treatment tank, there is a GNZS703 linear motion shale shaker, and 2 mini mud cleaner with desander cone and desilter cone separately.

Mini mud cleaner has larger screen area than desander, desilter with small underflow shaker, so the treating effect is better, and its cost is cheaper than mud cleaner with large underflow shaker. It is the ideal equipments for Geothermal well drilling.

Shear pump

BY 11 July 2012 Uncategorized

Shear pump is a kind of centrifugal pump, usually it is used together with mud hopper, it can mix effectively and hydrate completely the material added in the drilling fluid, save the mud material , reduce the time of configuration. If there is a pill tank or pill compartment, you must use shear pump with hopper, we called it jet shearing device.

It has better mixing efficiency than jet mud mixer, which is composed of centrifugal pump and mud hopper.

Do you know what is Vacuum Degasser and its function?

It is the 2nd phase solids control equipment, which is used after shale shaker, to separate various gas from the invasive drilling mud, so that it can protect decander, desilter cone and centrifugal pumps impeller.

 Different with Derrick vacuum degasser, this GN vacuum degasser do not need suction pump, it has self-suction ability, so it can save energy and drilling cost.