mud cleaner

As a supplier of
shaker screens, hydrocyclones, oilfield tools & spare parts supplier, GN
solids America
can provide replacement shaker screens for a lot of US brand
shale shaker, mud cleaner, Mission pump, welcome to check with our sales for
the stock.

We sell replacement
screens for Derrick FLC500, 48×30, Brandt Cobra, Swaco Mongoose, etc shale
, mesh size from API40 to API325, with different materials and wire
mesh. We also sell 4inch cone, 10 inch cone for mud cleaners.

Not only for the
spare parts, GN solids also provide oilfield solids control equipments and
drilling waste management equipments, including shale shaker, mud cleaner, high
speed decanter centrifuge, variable speed decanter centrifuge, rated speed
& VFD vertical cuttings dryer, centrifugal pump( equivalent to Mission
pump), mud agitators, hoppers, mud tanks, mud guns, mud gas separators, 9inch
decanter centrifuge for mining diamond core drilling, 18~22inch big bowl
decanter centrifuge for dewatering unit.

Recently we shipped
big qty equipments to international clients and domestic market as below:

1 10 units of 9 inch
up to 4500rpm decanter centrifuge to Canada for core drilling solids dewatering
and water consumption.

2 over 40 units of
GNLW363decanter centrifuges are shipped to Africa service company

3 3 sets of vertical
cuttings dryer, decanter centrifuges are shipped to Sinopec company last week

4  3 sets of drying shaker and VFD decanter
are shipped to Sichuan client

5 4 sets of drilling
waste management equipments are shipped to Russia for Baker Hughes project,
including 4 cuttings dryer , 4 decanter centrifuge, several telescopic skid,
several screw conveyors

…and more, GN solids
America take an act as the sales office, after-sales and warehouse of GN Solids
control, welcome to check our stocks in Houston and visit us at OTC 2015 in
Houston. We have various shaker screens in stock for different API mesh size.

Right now GN solids America-the branch company of GN solids control in China, need a sales engineer in our Houston branch. If you have years of experience in oil & gas drilling solids control industry, welcome to contact us and send us your CV.
We required that you must have over 2 years of experience in solids control or drilling waste management company or oil drilling related industry, if not, you must have many years of experience in big equipments sales in US, have the basic knowledge of international sales process and fly to South America countries regularly to visit potential clients and for after-sales service. 

Language: English, Spanish
Job Location: 6710 Windfern Road, Houston, TX 77040

Except for oil & gas drilling, GN equipments can be also applied for the applications below:
1 Drilling Waste Management/ Drilling cuttings treatment
2 Horizontal Directional drilling , underground construction, crossing, road work
3 Other drillings, like geothermal drilling, water drilling, mining drilling, coal bed methane drilling
4 All kinds of Water slurry separation, dredging slurry separation
If you are interested in working with GN solids America, pls email your CV to .

We will show our advanced drilling waste management equipments at OTC 2015, D version vertical cuttings dryer and C version decanter centrifuge, with shale shaker and mud cleaner. If you are interested to learn these equipments, welcome to visit our 2 stand at OTC:
Reliant Arena Booth A (290SF) No.: 9225-2    – Hebei GN Solids Control Co.,Ltd
Reliant Arena Booth B (200SF) No.: 6137        – GN Solids America LLC

GN solids control equipments has been improved a lot during these years according the client’ s good suggestion and we take a lot of stock equipments in Houston for immediate shipments for the main equipments, like 4-panel shale shaker, 3 en 1, decanter centrifuge, vertical cuttings dryer, etc. We would like to work with you to get to a bright future together.

Drilling waste are consist of drilling cuttings, waste water produced by drilling and oil storage, oily sludge, tank bottom waste, etc. GN vertical G dryer system can be used for all these types of drilling waste with our customized design. We have standard equipments just put them in different layout and use different speed( G force) to get the required result.
Firstly GN vertical cuttings dryer system will separate the oil based drilling cuttings from the materials collected from the rig site both in onshore and offshore, and get the waste water with oil, the oil content remained in the cuttings after treated by GNCD930D-VFD is around 5%, you need to transfer the cuttings to thermal unit to reduce oil content in the cuttings then disposal, otherwise you need drilling waste injection process. For the waste water with oil, a 3-phase decanter centrifuge can help to separate the oil from the waste water, and oil recovery can be re-used for the drilling fluids and save a lot of drilling cost, the waste water can be flocculation and feeding to the water treatment system.Such drilling waste water treatment process can apply both vertical cuttings dryer and decanter centrifuge or both of them, it depends on your budget of the projecct. But you should pay more attention to the solids particle size, it is very fine clay and silt solids, the vertical G dryer can not be applied, the decanter centrifuge is suitable for such situation.
The sudden crude oil price fall down caused the operators want to reduce their production cost, less the equipments’s purchasing value is a good and effective way. GN solids control with GN solids Ameria office and warehouse in Houston, provide service both for sales and rental. We have 10 units 4-panel shale shaker, 5 units of mud cleaner( desander, desilter, shaker 3 en 1), 3 units of high speed decanter centrifuge, 1 set of VFD centrifuge in stock for rental and sales, welcome to contact us at 6710 windfern road, Houston, TX 77040 or visit us at OTC 2015 Reliant Arena Hall, 6137 & 9225-2.

GN solids control, the mother company of GN solids America, can design and produce customized liquid mud plant/ mud tank system for worldwide clients.

Mud tank system/ solids control system for oil drilling, for workover rig 350HP, 450HP, 550HP, 650HP, 750HP; For oil & gas drilling rig 1000HP, 1500HP, 2000HP.

Project #1:

2 sets of Solids control system to one of the biggest government owned drilling rig manufactures in China for 350HP & 550HP drilling rig used in Cuba.The photo is as below:

Project #2: 3 Sets 1000HP Offshore Rig Solids Control Mud System for COSL, including:

•     Shale Shaker, GNZS703E-HB, 6 nos

•     Vacuum Degasser, GNZCQ270A, 3 nos

•     Mud Cleaner, GNZJ703E-2S12N, 3 nos

•     Decanter Centrifuge, GNLW452, 3 nos

•     Mud Tank, 500BBL, 9 nos

These mud tank systems are operated for jack-up drilling rigs and semi-submersible drilling rigs.Except for solids control system of oil drilling, we also produce liquid mud plant system for both onshore and offshore.

GN project #3: Liquid Mud Plant System for Africa, the equipments list as below:

•     7 ea Liquid mud tank with Rain Shade Roof Cover

•     21 ea mud agitator for mixing

•     21 ea mud gun

•     1 ea dual mud mixing unit

•     1 ea shear pump for shearing chemicals.

•     1 ea Electric hoist for lifting chemical bags

GN Project #4: Liquid Mud Plant (LMP) for China Oilfield Services Limited (COSL)

 •   mud tanks, same as 40ft container (12192X2438X2380mm), 17 nos

 •   Mud mixing skid with decanter centrifuge, mud hopper, shear pump and centrifugal pump, 1 set

•     Mud agitator, 51 nos

•     Mud Gun, 51 nos.

You can find all of GN project list from our official website or search GN solids control in Google for more info. GN solids control will provide free commissioning and installation service for free for the first time installation for the clients who bought our solids control system/ liquid mud tank, our engineer team will fly to your rigsite for training.

BY 5 December 2014 Uncategorized

Recently we have a lot of projects for geothermal drilling mud recycling system, the particular 2 projects are: 500gpm mud cleaning system to Kenya for geothermal drilling( for more detailed info and photo, pls check our website:, 1000gpm mud recycling system to Turkey for geothermal drilling, for more info, pls check here:

2 models of shale shakers can be used for Geothermal drilling:

GNZS594E-HB linear motion shale shaker, with 4 panel pre-tentioned shaker screens, mechannical shaker deck adjustment -1 ~+5°with max treating capacity for water 1000gpm, with 2 explosion proof and rain proof vibration motors Italy Oil or US Martin brand, 460/480V/60HZ, 3 phase, 2.5HP. We can make it tandam shale shaker, triple shale shaker for option. And we have pretentioned shaker screens in stock in our Houston warehouse. We also have elliptical motion shale shaker for option.

GNZS703E-HB linear motion shale shaker, with 3-panels steel frame shaker screens, max treating capacity is 528gpm at drilling mud with API40 shaker screens.

Not only the shale shaker, we also provide mud cleaner( desander cone, desilter cone and underflow shale shaker 3 in 1) , feeding pumps, mud tanks, mud agitators, mud mixers, mud guns, etc.

Except for geothermal drilling, GN designed mud recycling system can be workable for all kinds of drilling mud, like coal bed mathane, oil drilling, shale gas drilling( see GN drilling cuttings management system working in Shell’s rig site for shale gas drilling), diamond core drilling, and no-dig industry.

Except for 500gpm/1000gpm mud recycling system, we also design for 250gpm, 200gpm, 350gpm, 500gpm, 800gpm, 1000gpm for all kinds of drilling.

GN solids control linear motion shale shaker has been widely used in Latin America market for such geothermal drilling, and we have 4 shale shakers available of immediate shipment in Houston warehouse, pls check with GN sales at 6710 windfern road, Houston, TX 77040.