centrifugal pump

Mud agitator, mud gun, centrifugal pump, submersible
slurry pump, shear pump, mixing hopper, jet mud mixer, Jet shear mixer, is the
most common equipments used for oil & gas drilling liquid mud plant. GN
solids control has been provided such equipments to many big projects of liquid
mud plant for COSL( world’s top 10 oilfield service company) and other drilling
fluids service company in the world.

We can also provide customized design mud tanks for
liquid mud plant with flow level meters, pipelines, valves, stairs, mud gun
lines, with competitive price and compact design to meet your requirement of
volume.

We have rich experience in design different projects
liquid mud plant for both onshore and offshore, for synthetic oil based mud,
water based mud, base oil, brine and mixing tanks. Our standard container sized
square mud tanks with 400bbl volume, round cylinder type tanks are also
available for compact footprint.

We have 7 models mud agitators for option from 4HP,
7.5HP,10HP, 15HP, 20HP, 25HP, 30HP, the agitator shaft could be customized
according to your existing tank height. We have 9 models submersible slurry
pumps
for option, it could be used as mixing pump, feeding pump when
considering big volume, because it is installed vertically, it did not less the
tank volume as the horizontal installed pumps. And high solids content drilling
fluids could be transferred by such slurry pump, the benefit of low maintenance
cost is one of the reason. Also we have 4×3, 6×5, 5×4, 8×6 centrifugal pumps
with same footprint with Mission pump for option, shear pump is required when
the mixing material need to be cut. We also have 9 models jet mud mixer to meet
your customized mixing requirement, it is the combination of mixing hopper, centrifugal
pump
and the skid.  

Welcome to contact GN solids America for a quotation.

Submersible
slurry pump
can be used in different applications for oil & gas drilling
solids control system and mud recycling system. The applications are as below:

(1)   
Feeding pump for shale shaker in the mud recycling
system for HDD, water well drilling, CBM.

(2)   
Feeding pump for decanter centrifuge when there is
no enough place for the horizontal screw pump for different industries, oil
drilling , dewatering unit, drilling waste management system.

(3)   
Mixing pump with mixing hopper, because the
submersible slurry pump is vertical installed, which can save the place and
remain the storage capacity, but pls notice the lift and working pressure to
match the venturi hopper.

(4)   
Feeding pump for complete
desander/ desilter unit/ mud cleaning system from the mud pit, remember to
choose the correct model with proper lift, because the flow rate and lift will
loss during the transferring in the long distance. The normal submersible
length is 1.5m, and max 1.8m. If the mud pit or mud tank is very high, and you
need longer submersible length, we will suggest to use hose/pipe for the extra
length, or use the Submerged pump fully under the liquid level.

If there
are small rocks and high solids content in the mud, the submersible slurry pump
is pretty suitable because the impeller is with special wearable hard surface .Centrifugal
pump, screw pump can not be used in such applications, hose pump is another
option for such projects.

Compared
with the horizontal installed pumps, like centrifugal pump, shear pump, screw
pump, the vertical submersible slurry pump required small space and keep the
storage capacity and free of maintenance and reliable performance. There is no
bearing and gland seal between impeller and pump body, so the slurry pump is
maintance-free and high temperature resistance.

GN
solids control has various models of submersible slurry pumps for option.

GNZS706E
double deck shale shaker has been widely used for mineral dressing/ ore
separation project, for example, gold recovery. We use different mesh screen to
separate different required ore size, normally the top screen is 3mm opening steel plate screen( or polyurethane material screen for
longer service life) to separate the big solids bigger than 3mm, it can protect
the bottom screen and make the working time longer. The bottom screen is customized,
because different minerals will need to separate different size ore.

GNZS706E double deck shale shaker specifications:

Total screen area 4.66m2( 52.5 ft2), top screen area 2.03m2(24.2ft2)
with 3 panels screen, bottom screen area 2.63 m2(28.3 ft2) with 3 panels screen,
up to 7.0G( adjustable), linear motion shale shaker. The Max treating capacity
is 140m3/h.

Mineral
engineering, mineral processing, or mineral dressing or ore dressing, is the
process of separating commercially valuable minerals from their ores. The simplest sizing process is
screening, or passing the particles to be sized through a screen or number of
screens.

GN solids control also provide a solution to put the hydrocyclones on top of the double deck
shale shaker, as a simple/ compact desanding unit. The working principal is
different with the double deck shale shaker. When worked as a double deck shale
shaker, the material is feeding to the buffer box and flow to the top screen to
separate course ore, and drop down to the bottom screen to separate the required
size.

When
working as a desanding unit with the hydrocyclones, which is used to separate
more fine solids. The material is feeding to the bottom screen to separate
course size then use a centrifugal pump for feeding to the desander cone, to
separate solids bigger than 75 microns, the top screen function for drying the
separated solids size and recycle more fluids.

As a supplier of
shaker screens, hydrocyclones, oilfield tools & spare parts supplier, GN
solids America
can provide replacement shaker screens for a lot of US brand
shale shaker, mud cleaner, Mission pump, welcome to check with our sales for
the stock.

We sell replacement
screens for Derrick FLC500, 48×30, Brandt Cobra, Swaco Mongoose, etc shale
shakers
, mesh size from API40 to API325, with different materials and wire
mesh. We also sell 4inch cone, 10 inch cone for mud cleaners.

Not only for the
spare parts, GN solids also provide oilfield solids control equipments and
drilling waste management equipments, including shale shaker, mud cleaner, high
speed decanter centrifuge, variable speed decanter centrifuge, rated speed
& VFD vertical cuttings dryer, centrifugal pump( equivalent to Mission
pump), mud agitators, hoppers, mud tanks, mud guns, mud gas separators, 9inch
decanter centrifuge for mining diamond core drilling, 18~22inch big bowl
decanter centrifuge for dewatering unit.

Recently we shipped
big qty equipments to international clients and domestic market as below:

1 10 units of 9 inch
up to 4500rpm decanter centrifuge to Canada for core drilling solids dewatering
and water consumption.

2 over 40 units of
GNLW363decanter centrifuges are shipped to Africa service company

3 3 sets of vertical
cuttings dryer, decanter centrifuges are shipped to Sinopec company last week

4  3 sets of drying shaker and VFD decanter
centrifuges
are shipped to Sichuan client

5 4 sets of drilling
waste management equipments are shipped to Russia for Baker Hughes project,
including 4 cuttings dryer , 4 decanter centrifuge, several telescopic skid,
several screw conveyors

…and more, GN solids
America take an act as the sales office, after-sales and warehouse of GN Solids
control, welcome to check our stocks in Houston and visit us at OTC 2015 in
Houston. We have various shaker screens in stock for different API mesh size.

This week GN Solids America( based in 6710 windfern road, Houston, TX77040) shipped 10 shale shakers, 3 units of mud cleaners to our oil drilling solids control client. This is his repeat orders.

Right now we have 4 shale shakers and 1 mud cleaner in stock for sale, welcome to call GN solids America sales for the price offer.

Applications of GN shale shaker GNZS594:

1 as the first phase cleaning solids control equipment in the drilling rig solids control system

2 as hi-G dryer shaker in water based cuttings treatment system

3 as dewatering shakers to separate big solids before decanter centrifuge in the dewatering system

4 as shale shakers to separate big solids and less solids content before GN middle speed decanter centrifuge in barite recovery system

5 as 1st step mud cleaning equipment in HDD/CBM/ Geothermal drilling mud recycling system

6 as the underflow shale shaker of mud cleaner

7 as part of the bored pile desander unit

Application of GN mud cleaner GNZJ594-2S12N:

1 as the 2nd and 3rd phase cleaning equipment in oilfield solids control system

2 as bored piles desander unit

3 as part of waste water treatment system

4 as ideal equipment to separate solids from fluids for most industries

GN solids control has shaker screens in stock in our Houston warehouse, the API mesh size from API60 to API230. Also for the normal spare parts, like wedges, springs, vibration damps, bearings, oil seal, electric motors, gear box and other parts are all in stock for immediate shipment.

Except for shale shaker and mud cleaners, we also have mud mixer, hopper, centrifugal pump, mud gun, shear pump in stock, welcome to visit us.

Also we provide customized design mud tank system for your particular project, like waste oil recovery, barite recovery, drilling fluids recycling, bored piles, tunneling, etc.