slurry pump can be used in different applications for oil & gas drilling
solids control system and mud recycling system. The applications are as below:
Feeding pump for shale shaker in the mud recycling
system for HDD, water well drilling, CBM.
Feeding pump for decanter centrifuge when there is
no enough place for the horizontal screw pump for different industries, oil
drilling , dewatering unit, drilling waste management system.
Mixing pump with mixing hopper, because the
submersible slurry pump is vertical installed, which can save the place and
remain the storage capacity, but pls notice the lift and working pressure to
match the venturi hopper.
Feeding pump for complete
desander/ desilter unit/ mud cleaning system from the mud pit, remember to
choose the correct model with proper lift, because the flow rate and lift will
loss during the transferring in the long distance. The normal submersible
length is 1.5m, and max 1.8m. If the mud pit or mud tank is very high, and you
need longer submersible length, we will suggest to use hose/pipe for the extra
length, or use the Submerged pump fully under the liquid level.
are small rocks and high solids content in the mud, the submersible slurry pump
is pretty suitable because the impeller is with special wearable hard surface .Centrifugal
pump, screw pump can not be used in such applications, hose pump is another
option for such projects.
with the horizontal installed pumps, like centrifugal pump, shear pump, screw
pump, the vertical submersible slurry pump required small space and keep the
storage capacity and free of maintenance and reliable performance. There is no
bearing and gland seal between impeller and pump body, so the slurry pump is
maintance-free and high temperature resistance.
solids control has various models of submersible slurry pumps for option.