Flare Ignition Device manufacture by GN Solids America LLC is
for blown down fuel gas designed and manufactured by us is used in burn down
excess natural gas. The flammable  gas
from collecting and distributing station of natural gas and from oil refinery and
its being a security and environmental
protection equipment. It used for have the blown down harmful gas ignited and
burned to prevent the environment and security from being endangered. The flare
ignition device, may be paired with GNZYQ 1000A Mud Gas Separator.
And now, as a developed product it has been extensively used in petroleum
drilling operation.

As said before,  Flare Igniter Device
is the safety and environmental protection equipment for handling vented
explosive gas. It can ignite the toxic combustible gas timely
and accurately. 

Flare Igniter operation safety steps for
oil drilling sites

1The flammable gas conveyed to the air intake of gas burner (torch)
through the pipeline installed at the safe area. 
2. Connect and start current transformation of flare ignition device and
electric circuit of voltage amplification. 
3. Open the liquefied gas pot and ignite fire-leading tube through
operating electronic igniter (ignition at 1st stage), or with the
fire-leading gas valve of emptying gas directly opened, ignite
fire-leading tube through electronic
igniter
 (ignition at 1st stage).   
4. Open gas blown down valve and ignite the blown down gas through the
flaming fire-leading tube (ignition at 2nd stage). 
5. Have the liquefied gas pot closed with fire-leading tube put out,
letting the blown down flammable gas to freely burning. 

GN Solids America LLC is manufacture who
produce full set of solids control machinery, custom Drilling
mud system
, supportive machinery.
Over 60 plus countries around have use our machinery in many years and
give us repeat order business.  


ABOUT THE AUTHOR

gnadmin