Among all typically the solids control
equipment, often the shale shaker and the desander or desilter cones
usually are of less technology. The coffee quality for the shale shakers often
depends on the designed construction, the material choosing and the welding
standards, like if there are pockets in the welding seam. Actually , in the
first year connected with operation, a well made shale shaker and a poorly
produced one are nearly a similar with each other. But when they are applied
longer than one year, the issues start to show. In a word, often the shale
shakers’ technology is just not so complicated.
Comparing with all the shale shaker and mud cleaner (which could
be broken down to desander cones in addition to desilter cones), the decanter
centrifuge shows a manufacturer’s producing capability to the most. Due to the
1 . there are many rotating elements in the decanter centrifuge, the actual
producing accuracy is very important towards the rotating part. And the
providing accuracy comes from the enhanced producing machines and specialist
operators and workers.
GN Solids Control
as the solids control and waste material
management centrifuge
manufacturer, is likewise the first one in this field
in order to invite the five deal with producing machine for the centrifuge
parts manufacturing in order to assure the accuracy.

2 . often the decanter centrifuge is involving highly speed and the nearly all
welcome speed for waste materials management centrifuge is 3200RPM. Although
many manufacturers claim that their very own centrifuges could reach broadband
up to 3200RPM, but rarely could ensure the noises and vibration during top
speed. GN Solids Control’s centrifuges are under precise make sure producing
and each one ended up being strictly inspected before shipping and delivery. So
GN’s high speed centrifuge is really high speed performance one particular.
3. a suitable length as well as diameter ratio. Normally it really is 3, and 3
is a very suitable ratio for the spend management centrifuges. For the solids
control ones for the treatment of the HGS, the middle rate and 2 of span
diameter ratio is enough. And in addition how long is the cone element affect
the treating performance.
Could you consult GN for more information.